I may receive a commission for purchases made through product links on this page, but I always stand by the research and recommendations that I provide here.
You can get a water filter to purify your drinking water. There are plenty of water filters on the market, including those that give you alkaline drinking water. If you are looking for an alkaline water filter, then you might be interested in the Santevia water filter (Amazon Link) It’s a water purification with plenty of features. Read deeper into this Santevia water filter review to find out more.
Main Features
The Santevia water filter, which is also known as the Santevia gravity water system, comes with useful features that make the purification method easy. The filter relies on gravity to purify your drinking water. You only need to pour the unfiltered water in the top chamber of this system, and then gravity will deal with the rest.
What’s more, the Santevia water filter does not require plumbing or electricity to operate. That implies that you can use it in both indoor and outdoor environments.
Filtration Stages
This alkaline water filter features a nine-stage filtration process. Each stage is designed to get rid of different contaminants so that you can have clean and safe drinking water. Let’s have a look at each of these stages.
Stage I – ceramic pre-filter
At the top chamber of this filter is a ceramic pre-filter, which is shaped like a disc. It’s designed with tiny pores measuring 0.3 microns. The size is enough to allow water to pass through while filtering micro-plastics, bacteria, parasites, dirt, and rust. This is where you pour in your unfiltered water, which then sips trough to a fluoride filter cartridge.
Stage II – activated alumina
Next, the water passes through the activated alumina, whose purpose is to remove fluoride. It eliminates up to 98 percent of fluoride, and that’s quite advantageous because most water filters cannot get rid of this contaminant. It’s also safe for both you and the environment.
Stage III – granular activated carbon
The water then flows down the granular activated carbon, which is made from coconut shells. It is very effective when it comes to removing contaminants such as heavy metals, chlorine, and other chemicals. It also eliminates bad odor and tastes from your drinking water.
Stage IV – kinetic degradation fluxion
This filter also features kinetic degradation fluxion. It works together with the granulated activated carbon to get rid of chlorine and heavy metals such as copper, lead, and mercury. Besides that, it also prevents the growth of mold and bacteria in your filtration system, keeping it in top-notch condition.
Stage V – pH mineral balls
This is one of the unique filtration stages that the Santevia water filter contains. Here, magnesium, calcium, and other trace minerals are added to your water. The purpose of the pH mineral balls is to raise the pH level of the water so that it’s more alkaline. Keep in mind that alkaline water hydrates better than acidic water.
Stage VI – mineral stone fusion
Next, the water passes through small Maifan stones, whose purpose is to add minerals so that the water becomes more alkaline. Besides, these stones help to oxygenate the water.
Stage VII – natural silica sand
Afterward, your water goes through natural silica sand, which helps to get rid of small/microscopic concentrations of dissolved materials from the water. It usually contains small grains of quartz rock.
Stage VIII – mineral stones
This stage is at the bottom chamber of the Santevia gravity water system, and it contains Maifan stones and energy balls. The former add calcium, zinc, magnesium, potassium, and other trace minerals to your drinking water. The latter breaks up large water molecules so that the trace minerals can be absorbed better, plus they help to stabilize the pH.
Stage IX – magnetic energizer
Lastly, the water goes through a stage known as a magnetic energizer. It normally takes place in the filter’s spigot, which contains magnets. The magnets help to realign, activate, and energize the water molecules to promote absorption.
Eco-friendly
The Santevia water filter system is also quite eco-friendly. It does not leave pollutants in the purification process, which could harm the environment. Moreover, when you drink water that’s filtered by this system, you reduce the risk of illnesses caused by contaminants and microorganisms in water. Also, it eliminated the need to have water bottles, which end up harming the environment because they are non-biodegradable.
Besides, the fact that you do not have to spend money every time you want to consume clean and safe water makes this water filter quite economical. Furthermore, the Santevia gravity water system is economically priced.
Large capacity
One of the notable features of this water filter is its large capacity. Its capacity is much larger compared to other alkaline water filters in its category. The system can hold close to four gallons of water, and the lower chamber holds more than the upper chamber.
BPA-free
You must also know that this alkaline water filter is constructed with BPA-free materials. That not only guarantees you that it is safe for your health but also stands for superior quality. What’s more, all the components are certified.
Pros
- Economically priced
- Has an impressive design
- Relies on a natural water purification process
- Environmentally friendly
- Requires no plumbing or electricity
- Delivers clean, safe, and great tasting water
Cons
- It could leak easily
- Changing the filters may prove a daunting task
- Only features a 90-day warranty
Final word
Drinking tap water may be unsafe for you; that’s why it’s wise to invest in a water filter system. The Santevia water filter is an alkaline water filter, which not only cleans your drinking water but also improves its taste. It has a nine-stage filtration process, and it removes plenty of contaminants to ensure that the water is safe for drinking.